Woodstock W1038 4-Inch Quick Connect and Disconnect

#ad
WOODSTOCK W1038 #ad - Length is 4-Inch. Large outside diameter is 4-1/4-Inch. Woodstock 4in quick connect/Disconnect W1038 Material thickness is 1/8-Inch. Small outside diameter is 3 7/8-Inch.

#ad



POWERTEC 70149 Dust Control Flex Cuff with Hose Clamps, 4-Inch

#ad
Southern Technology LLC 70149 #ad - Designed to airtight connection of two fittings or hoses without using duct tapes. A pair of hose clamps included. The powertec dust control flex cuff with hose clamps, 4-inch, delivers an airtight connection from one dust-collection fitting to another of comparable size, while eliminating the need for flimsy duct tape connections or other permanent fasteners.

Handy set includes one rubber cuff and two steel hose clamps. Pre-molded indents on the cuff allows for easy, airtight clamp installation. Adapters or hoses. Firm yet pliable rubber construction allows enough flexibility to bridge slight diameter differences in hose or tubing. And 4-5/64-inch I. D. Connect to 4-inch O.

POWERTEC 70149 Dust Control Flex Cuff with Hose Clamps, 4-Inch #ad - D. Rubber construction provide flexibility to bridge slight diameter differences. Both ends measures 4-9/16-inch o. D.

#ad



POWERTEC 70125 ABS Pipe Hose Adapter, 4"

#ad
Southern Technology LLC 70125 #ad - The powertec hose adapter, easily and securely from your pipe to a multitude of fittings; narrow end fits into ordinary 4-Inch PVC pipes for example, waste, drain, etc, and tapered end with 4-Inch ID fits most 4-Inch dust collection fittings wyes, tees, vent, 4-Inch, is designed to make connections, elbow and blast gates, etc.

Fittings. Narrow end measures 4-inch o. D. To connect to 4-Inch O. D. Designed to make connections from your pipe to multitude of fittings. And 3-31/32-inch I. D. To fit inside 4-Inch PVC pipe. And 3-49/64-inch I. D. Adapters or hoses. A pair of hose clamps included. Both ends measures 4-9/16-inch o. D. Ensuring airtight hose to fitting linkage, this handy device will be a "strong link" in your dust-collection system.

POWERTEC 70125 ABS Pipe Hose Adapter, 4" #ad - And 4-5/64-inch I. D.

#ad



Big Horn 11741PK 4-Inch Key Hose Clamp, 5-Pack, Colors may vary

#ad
Big Horn 11741PK #ad - Provides leak-proof seal. And 4-5/64-inch I. D. Connect to 4-inch O. D. Designed to airtight connection of two fittings or hoses without using duct tapes. Warning: this product can expose you to chemicals which is are known to the State of California to cause cancer and birth defects or other reproductive harm. And 3-31/32-inch I.

Big Horn 11741PK 4-Inch Key Hose Clamp, 5-Pack, Colors may vary #ad - D. Made of superior, durable ABS plastic with high abrasion resistance levels. Adapters or hoses. Rubber construction provide flexibility to bridge slight diameter differences. Designed to make connections from your pipe to multitude of fittings. A pair of hose clamps included. Our 4-inch stainless steel Key Hose Clamps hand tighten for a leak-proof seal, even in tight spaces.

To fit inside 4-Inch PVC pipe. For more information go to www. P65warnings. Ca. Gov. Both ends measures 4-9/16-inch o.

#ad



POWERTEC 70193 Screw End Quick Coupler, 4"

#ad
POWERTEC 70193 #ad - This essential device expands the versatility and efficiency of your dust collection system, and it does so instantly and accurately. And 3-31/32-inch I. D. Easy to tighten. And 3-49/64-inch I. D. Provides quick and easy connections between nominal 4-Inch O. D. Made of superior, durable ABS plastic with high abrasion resistance levels.

POWERTEC 70193 Screw End Quick Coupler, 4" #ad - And 4-5/64-inch I. D. Connect to 4-inch O. D. Narrow end measures 4-inch o. D. Ports and 4-Inch flexible hoses. Designed to make connections from your pipe to multitude of fittings. Tapered end offers press-on attachment. To connect to 4-Inch O. D. To fit inside 4-Inch PVC pipe. No tools required. Easy to use, ultra-convenient, sturdy and dependable, the powertec 4-inch by 4-Inch Screw End Quick Coupler helps to ensure that your dust collection operates at peak efficiency and performance - it provides the perfect fit every time! Designed to airtight connection of two fittings or hoses without using duct tapes.

The powertec 4-inch screw end quick coupler provides a quick, easy and tight-fitting connection between a 4-Inch dust port/fitting nominal 4” O.

#ad



POWERTEC 70136 4-Inch to 2-1/2-Inch Cone Reducer

#ad
Southern Technology LLC 70136 #ad - Easy to tighten. Large end measures 4-7/32-inch o. D. 4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID. And 4-5/64-inch I. D. Connect to 4-inch O. D. Adapters or hoses. To fit inside 4-Inch PVC pipe. The powertec 4-inch to 2-1/2-inch cone reducer allows you to connect 4-Inch port to a 2-1/2-Inch hose or a 2-1/2-Inch port to a 4-Inch hose.

POWERTEC 70136 4-Inch to 2-1/2-Inch Cone Reducer #ad - And 3-31/32-inch I. D. Both ends measures 4-9/16-inch o. D. Tough durable ABS plastic. No tools required. The 2-1/2-inch opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. Simple to install, use and uninstall for the utmost in ease, performance and reliability. And 3-49/64-inch I.

D. Narrow end measures 4-inch o. D. Designed to make connections from your pipe to multitude of fittings.

#ad



POWERTEC 70126 Inlet Flange, 4-Inch

#ad
Southern Technology LLC 70126 #ad - And 4-5/64-inch I. D. Connect to 4-inch O. D. Pre-bored mounting holes for hassle free installation. Convenient, handy and sturdy, this handy dust collection accessory will help to ensure that your dust-collector is working at peak efficiency and effectiveness. Made of superior, durable ABS plastic with high abrasion resistance levels.

POWERTEC 70126 Inlet Flange, 4-Inch #ad - The powertec inlet flange, 4-Inch, mounts easily and securely on most level surfaces. Easy to tighten. Fittings. Dust, chips and debris are extracted, fresh clean air is released. Tapered end offers press-on attachment. Narrow end measures 4-inch o. D. Large end measures 4-7/32-inch o. D. Connect 4" id flexible dust collection hose to 2-1/2" ID flexible dust collection hose.

Provides quick and easy connections between nominal 4-Inch O. D. No tools required. 4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID.

#ad



POWERTEC 70143 PVC Dust Collection Hose 4 Inch x 20 Feet | Flexible Clear Vue Heavy Duty PVC Hose

#ad
Southern Technology LLC 70143 #ad - Rated safe with dust collection, one must always consider the dangers of static electricity and fire risk. Pre-bored mounting holes for easy and secure installation. Product specification data  construction: heavy duty soft pvc polyvinyl Chloride  Reinforced Spiral Spring Steel Wire: Spring Steel Wire  Size: 4 inches diameter x 20 feet long Wall Thickness: 0

POWERTEC 70143 PVC Dust Collection Hose 4 Inch x 20 Feet | Flexible Clear Vue Heavy Duty PVC Hose #ad - 5 mm /1/64 flammability rating: ul94-hb  compression ratio: 3:1  temperature range: -50°f to 158°F short term up to176°F From POWERTEC A US based leading manufacturer of woodworking tools, shop dust collection hose management accessories, and OEM replacement parts. Threaded end screws tightly into flexible hose.

Tough, durable ABS plastic material. And 3-31/32-inch I. D. Connect 4" id flexible dust collection hose to 2-1/2" ID flexible dust collection hose. Includes one clear flexible hose - 20 feet long 4" Diameter. Ports and 4-Inch flexible hoses. And 4-5/64-inch I. D. Connect to 4-inch O.

#ad



POWERTEC 70111 PVC Dust Collection Hose 4 Inch x 10 Feet | Flexible Clear Vue Heavy Duty PVC Hose

#ad
POWERTEC 70111 #ad - Includes one clear flexible hose - 10 feet long 4" Diameter. Use powertec 70149, dust control flex cuff sold separately to connect 4" nominal od end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff sold separately to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters. 4-inch nominal end measures 3-59/64-inch OD.

Designed to make connections from your pipe to multitude of fittings. The 4-inch x 10-foot pvc dust collector hose - powertec 70111 A practical, safe and cost effective dust collection hose designed to enhance your existing workshop dust collection and filtration systems. Flexible versatilitywhether you have an industrial vacuum cleaner or a centralized dust collection system built into your shop, you understand the importance of having a super lightweight, flexible and kink-proof dust collection hose that can withstand the rigors of everyday shop use.

Heavy dutymade from high quality PVC material, this hose will not collapse under pressure from your dust collector. A pair of hose clamps included. 4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID. Designed to airtight connection of two fittings or hoses without using duct tapes.

POWERTEC 70111 PVC Dust Collection Hose 4 Inch x 10 Feet | Flexible Clear Vue Heavy Duty PVC Hose #ad - Pvc’s durability, sawdust collection, strength and easy installation make it ideal for workshop dust control, carpentry and woodworking applications. Innovative design featuresflaunts an impressively translucent body, reinforced by interior spiral spring steel wire – allowing you to monitor your air movement performance, debris collection and fine dust separation/ filtration.

#ad



POWERTEC 70106 4-Inch Y-Fitting Dust Hose Connector

#ad
POWERTEC 70106 #ad - Three 4-inch nominal ends measure 3-61/64-Inch O. D. Designed to make connections from your pipe to multitude of fittings. And 3-31/32-inch I. D. Ideal for an assortment of sawdust Collectors, air conditioning indoor ventilation ducts and 4" PVC dust collection systems for woodworking applications. The durable powertec 4-inch y-fitting dust hose Connector is the ideal solution for expanding your dust hose collection system, thereby optimizing system efficiency, flexibility and effectiveness.

Designed to attach easily and securely to machines for connecting to dust collection systems. Adaptable to most shop vacuum cleaner hoses with 2-1/4" OD connectors. Made from high quality PVC for durability, strength and easy installation. Use powertec 70149, dust control flex cuff sold separately to connect 4" nominal od end to other 4" OD adapters; Use Powertec 70148, Dust Control Flex Cuff sold separately to connect 2-1/2" nominal OD end to other 2-1/2" OD adapters.

POWERTEC 70106 4-Inch Y-Fitting Dust Hose Connector #ad - This handy component allows you the ability to connect two separate machines - or two hoses from the same machine - directly to the dust collector's main hose. Tapered end offers press-on attachment. Tough durable ABS plastic. Use this sturdy, tight-fitting connector to facilitate a dual hose branch connection from a single main hose line.

#ad



POWERTEC 70101 4-Inch Wire Hose Clamp, 5-Pack

#ad
POWERTEC 70101 #ad - Adapters or hoses. Designed to airtight connection of two fittings or hoses without using duct tapes. 4" nominal od end measures 3-61/64" od and 3-41/64" id; 2-1/2" nominal OD end measures 2-15/32" OD and 2-9/32" ID. No tools required. Three 4-inch nominal ends measure 3-61/64-Inch O. D. And 3-3/4-inch I. D. Includes: 4 inch double Wire Hose Clamps - Pack of 5.

POWERTEC 70101 4-Inch Wire Hose Clamp, 5-Pack #ad - Flange diameter measures 5-9/16-Inch. Tough, durable ABS plastic material. Ideal for an assortment of sawdust Collectors, air conditioning indoor ventilation ducts and 4" PVC dust collection systems for woodworking applications. Easy to tighten. Includes one clear flexible hose - 20 feet long 4" Diameter. Large end measures 4-7/32-inch o.

D. Easy to use: simple release and tighten the screw to adjust the clamp diameter. And 3-49/64-inch I. D. And 3-23/32-inch I. D.

#ad