ImpressArt Metal Stamping Sticker Guides

#ad
ImpressArt SC21-Book #ad - To use the pattern grids, stick the transparent grid on your blank, and use the grid lines to stamp symmetrical patterns. Stamp guides help align metal stamp letters properly when metal stamping. Each stamp guides book contains 14 Straight Guides, 28 Circle Guides in various sizes, and 28 Pattern Grids. Sticker guides are thick card-stock and can be re-used and written on.

ImpressArt Metal Stamping Sticker Guides #ad - Helps space out letters and words evenly, giving an elevated look to your DIY jewelry. To use the straight or circle guides, simply stick a guide to your blank, line up your stamp with the spacing line, and stamp along the top ridge. Includes: 14 straight guide stickers, 28 Pattern Grid Stickers, 28 Circles Guides Stickers in assorted sizes.

Essential asset to your metal stamping tools and supplies, great for beginners who are learning, as well as expert hand stampers. Stamp guides makes it easy to space out letters, stamp in a straight line or a curve, and stamp Mandalas and other intricate patterns.

#ad



ImpressArt Metal Stamp Enamel Marker, Black Acrylic Ink

#ad
ImpressArt P101-MAR #ad - Simply run the tip of your marker over the stamped area from left to right, wait 3-5 minutes, and wipe away excess ink with a soft cloth Stamp enamel fills-in metal stamped impressions by darkening with black acrylic ink pen. Easy process, just allow 3-5 minutes for ink to dry and acrylic in will stay intact, within your hand stamped jewelry.

Adding stamp enamel will highlight your stamped impressions for easy identification. Elevate your metal stamped jewelry by filling in your impressions for everyone to see! Convenient applicator marker makes highlighting impressions quicker, easier, and cleaner. An essential metal stamping tool. Impressart's new stamp enamel marker is an acrylic ink used to darken stamped impressions so your design will be seen clearly.

ImpressArt Metal Stamp Enamel Marker, Black Acrylic Ink #ad - Convenient application marker with replacement tip use if tip frays from applying to rough surfaces like wood.

#ad



ImpressArt Stamp Straight Tape

#ad
Beadaholique SC21-532 #ad - An essential metal stamping tool. Simply create a straight line with the top edge of the tape along your workpiece to create a guide. Convenient application marker with replacement tip use if tip frays from applying to rough surfaces like wood. To help evenly space out your letters, mark your Stamp Straight Tape with a pen where each letter will be stamped.

Stamp straight Tape allows precise accuracy when stamping letters on metal jewelry. Easy process, just allow 3-5 minutes for ink to dry and acrylic in will stay intact, within your hand stamped jewelry. Mark stamping Blanks for Accurate Metal Stamping. Helps evenly Space Out Letters. Adding stamp enamel will highlight your stamped impressions for easy identification.

ImpressArt Stamp Straight Tape #ad - Elevate your metal stamped jewelry by filling in your impressions for everyone to see! Lightly place stamp on disc and drag it towards the edge of the tape until you feel the bottom of the stamp catch the edge. Now all of your stamps will line up perfectly. Stamp enamel fills-in metal stamped impressions by darkening with black acrylic ink pen.

#ad



Basic Bridgette Letter & Number Metal Stamp Kit - ImpressArt - Uppercase/Lowercase/Number - 3MM - 63 Piece Punch Set Complete Set of 3

#ad
ImpressArt SCE1815-3mm #ad - Each set includes storage case. Oil-coated to protect from rust - simply wipe down with a dry paper towel or rag before using. Convenient application marker with replacement tip use if tip frays from applying to rough surfaces like wood. In order to prevent rust, these stamp sets are lightly coated with oil.

The letters will naturally vary in size. The shank size is 2 1/4'' x 1/4''. For stamping soft metals including aluminum, pewter, nickel silver, brass, Alkeme, copper, and also wood. This graceful, wispy typeface is perfect for upbeat messages and softer-looking stamped jewelry and craft designs. Simply wipe down with a dry paper towel or rag before using.

Basic Bridgette Letter & Number Metal Stamp Kit - ImpressArt - Uppercase/Lowercase/Number - 3MM - 63 Piece Punch Set Complete Set of 3 #ad - Do not use on stainless steel. Please note that the sides of the stamps are not labeled with markings. Avoid wiping with anything wet - water will cause stamps to rust. Stamp enamel fills-in metal stamped impressions by darkening with black acrylic ink pen. Adding stamp enamel will highlight your stamped impressions for easy identification.

Elevate your metal stamped jewelry by filling in your impressions for everyone to see! Impressart's bridgette letter stamps have that hand-written, finger-brushed look, but are also crisp and easy to read.

#ad



ImpressArt- Whimsy Heart Design Stamp, 3mm

#ad
ImpressArt SCDESIGN-158K #ad - Designs are precision-cut from carbon tool steel, hardened to last project after project. Each set includes storage case. Oil-coated to protect from rust - simply wipe down with a dry paper towel or rag before using. For stamping soft metals including brass, gold, copper, clay, aluminum as well as wood, sterling silver, nickel silver, and matte board.

Impression Size: 3mm. Stamp enamel fills-in metal stamped impressions by darkening with black acrylic ink pen. Adding stamp enamel will highlight your stamped impressions for easy identification. Elevate your metal stamped jewelry by filling in your impressions for everyone to see! Easy process, just allow 3-5 minutes for ink to dry and acrylic in will stay intact, within your hand stamped jewelry.

ImpressArt- Whimsy Heart Design Stamp, 3mm #ad - Mark stamping Blanks for Accurate Metal Stamping. Helps evenly Space Out Letters. Full set of 3 63 punches: metal stamping kit includes 1 uppercase letter set 1 lowercase letter set 1 number stamp set. Size: the stamp heads are 3mm. An essential metal stamping tool. The letters will naturally vary in size. Do not use on stainless steel.

#ad



ImpressArt, Solid Steel Bench Block w/ Rubber Feet, 2" X 2", Jewelers Bench Block for Stamping, Shaping, Chasing, & Flattening Metals

#ad
ImpressArt SC22-SM #ad - Stamp enamel fills-in metal stamped impressions by darkening with black acrylic ink pen. Do not use on stainless steel. Please note that the sides of the stamps are not labeled with markings. The letters will naturally vary in size. Easy process, just allow 3-5 minutes for ink to dry and acrylic in will stay intact, within your hand stamped jewelry.

Mark stamping Blanks for Accurate Metal Stamping. Helps evenly Space Out Letters. Full set of 3 63 punches: metal stamping kit includes 1 uppercase letter set 1 lowercase letter set 1 number stamp set. Size: the stamp heads are 3mm. Block comes with rubber feet to protect the work surface and to reduce noise.

ImpressArt, Solid Steel Bench Block w/ Rubber Feet, 2" X 2", Jewelers Bench Block for Stamping, Shaping, Chasing, & Flattening Metals #ad - The shank size is 2 1/4'' x 1/4''. For stamping soft metals including aluminum, Alkeme, nickel silver, copper, pewter, brass, and also wood. Built to handle your hammer's blow, this block provides a solid surface for stamping, shaping and flattening metal. Adding stamp enamel will highlight your stamped impressions for easy identification.

Elevate your metal stamped jewelry by filling in your impressions for everyone to see! Small steel metal stamping block - an essential jewelry stamping tool created by ImpressArt, the leader in metal stamping supplies.

#ad



ImpressArt SC910-KIT Bending Bar, Silver

#ad
ImpressArt SC910-KIT #ad - Stamp enamel fills-in metal stamped impressions by darkening with black acrylic ink pen. The letters will naturally vary in size. An essential metal stamping tool. Convenient application marker with replacement tip use if tip frays from applying to rough surfaces like wood. Impressart's bracelet bending Bar Kit includes both the tools and the blanks necessary for creating a oval cuff bracelet bases.

The shank size is 2 1/4'' x 1/4''. For stamping soft metals including aluminum, nickel silver, brass, Alkeme, copper, pewter, and also wood. Do not use on stainless steel. Please note that the sides of the stamps are not labeled with markings. Each set includes storage case. Oil-coated to protect from rust - simply wipe down with a dry paper towel or rag before using.

ImpressArt SC910-KIT Bending Bar, Silver #ad - For stamping soft metals including brass, nickel silver, copper, gold, aluminum as well as wood, clay, sterling silver, and matte board. Impression Size: 3mm. Small steel metal stamping block - an essential jewelry stamping tool created by ImpressArt, the leader in metal stamping supplies. Surface: 2" x 2" - height: 3/8" - all surfaces are ground flat, which promotes precision metal stamping, hardened, and smoothly polished, helping your DIY crafts reach an elevated look.

Great for metal stamping blanks/ jewelry tags, laying-out, shaping, flattening, and for chasing, and stamping metal and other hard material.

#ad



ImpressArt 1 Pound Metal Stamping Hammer

#ad
ImpressArt SC711 #ad - Also works well with flattening wire for jewelry making. The brass head helps to extend the life of your metal stamps by reducing wear and tear throughout each hand stamping project. Small steel metal stamping block - an essential jewelry stamping tool created by ImpressArt, the leader in metal stamping supplies.

Surface: 2" x 2" - height: 3/8" - all surfaces are ground flat, which promotes precision metal stamping, and smoothly polished, hardened, helping your DIY crafts reach an elevated look. Great for metal stamping blanks/ jewelry tags, flattening, shaping, laying-out, and for chasing, and stamping metal and other hard material.

Constructed of solid carbon steel - this steel bench block is highly resistant to scratching, making it a perfect jeweler's bench block for metal stamping, and dents, marring, and working with soft metals. Solid steel bench block includes rubber feet for surface grip, shock absorption, and noise reduction when metal stamping.

ImpressArt 1 Pound Metal Stamping Hammer #ad - Includes both the tools and the blanks necessary for creating a oval cuff bracelet bases. Convenient application marker with replacement tip use if tip frays from applying to rough surfaces like wood. Each set includes storage case. Oil-coated to protect from rust - simply wipe down with a dry paper towel or rag before using.

For stamping soft metals including brass, clay, gold, copper, aluminum as well as wood, sterling silver, nickel silver, and matte board.

#ad



ImpressArt Bracelet Guides for Metal Stamping

#ad
ImpressArt SC21-BOOK-ST #ad - Small steel metal stamping block - an essential jewelry stamping tool created by ImpressArt, the leader in metal stamping supplies. Surface: 2" x 2" - height: 3/8" - all surfaces are ground flat, and smoothly polished, which promotes precision metal stamping, hardened, helping your DIY crafts reach an elevated look.

Great for metal stamping blanks/ jewelry tags, shaping, laying-out, flattening, and for chasing, and stamping metal and other hard material. Constructed of solid carbon steel - this steel bench block is highly resistant to scratching, making it a perfect jeweler's bench block for metal stamping, and dents, marring, and working with soft metals.

ImpressArt Bracelet Guides for Metal Stamping #ad - Solid steel bench block includes rubber feet for surface grip, shock absorption, and noise reduction when metal stamping. Includes both the tools and the blanks necessary for creating a oval cuff bracelet bases. Brass heads are better than steel heads for metal stamping because brass evenly disperses the energy of the hit into the stamping blank.

An essential metal stamping tool. Includes 36 sticker guides. With a smaller, scaled down grip, it provides easy handling and precision striking. Best used with 1/4", 3/8" & 5/8" bracelet blanks. Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project.

#ad



100 Pieces Metal Stamping Blanks Flat Round Washer with Center Hole for Bracelet Jewelry Making DIY Crafts

#ad
Hotop #ad - Specifications: Material: aluminum Diameter: 078 inch hole diameter: 039 inch Thickness: 006 inch color: silver package includes: 100 x Stamping blank tags Notices: May have slight size error due to manual measurement. The letters will naturally vary in size. This hammer is great for the beginner and intermediate stamper.

Each set includes storage case. Oil-coated to protect from rust - simply wipe down with a dry paper towel or rag before using. For stamping soft metals including brass, clay, aluminum as well as wood, copper, gold, sterling silver, nickel silver, and matte board. Impression Size: 3mm. Impressart's brass 1 pound metal stamping hammer was designed for metal stamping.

100 Pieces Metal Stamping Blanks Flat Round Washer with Center Hole for Bracelet Jewelry Making DIY Crafts #ad - Use to easily space out stamped letters. Please note that brass hammers may flake when striking however, this prolongs the life of the stamp by taking the most of the hammer blow! Convenient application marker with replacement tip use if tip frays from applying to rough surfaces like wood. The head is firmly attached to the handle.

This prevents double impressions and also provides longevity to your stamps and steel punches. Brass hammer head just under 1 pound in weight and the grip is roughly 7 inches long. Back side of the hammer head can be used as a ball peen for metal shaping, forming, and texturing.

#ad



ImpressArt Bracelet Bending Pliers - Jewelry Forming Tool, for Shaping Bracelets, Cuffs, and Metal Strip Blanks

#ad
ImpressArt SC6316 #ad - The bracelet bender is one of our best jewelry making tools. Constructed of stainless steel and built to last. Do not use on stainless steel. Please note that the sides of the stamps are not labeled with markings. An essential metal stamping tool. The 1 pound head and grooved grip aids in striking metal stamps with the right amount of force, every single time.

Includes 36 sticker guides. Impressart is the leader in metal and jewelry stamping tools and supplies. Scaled down grip and 1 pound brass head ensures that every strike is accurate, resulting in a professional jewelry or leather DIY project. Small steel metal stamping block - an essential jewelry stamping tool created by ImpressArt, the leader in metal stamping supplies.

Surface: 2" x 2" - height: 3/8" - all surfaces are ground flat, and smoothly polished, hardened, which promotes precision metal stamping, helping your DIY crafts reach an elevated look. Great for metal stamping blanks/ jewelry tags, laying-out, shaping, flattening, and for chasing, and stamping metal and other hard material.

ImpressArt Bracelet Bending Pliers - Jewelry Forming Tool, for Shaping Bracelets, Cuffs, and Metal Strip Blanks #ad - Constructed of solid carbon steel - this steel bench block is highly resistant to scratching, and dents, making it a perfect jeweler's bench block for metal stamping, marring, and working with soft metals. Solid steel bench block includes rubber feet for surface grip, shock absorption, and noise reduction when metal stamping.

Includes both the tools and the blanks necessary for creating a oval cuff bracelet bases. Also works well with flattening wire for jewelry making.

#ad