High Rider Sleever Bar Holder Left Side of Belt

#ad
McClure Clan Leathers #ad - Rides high on belt, will fit up to 2. 5 " belt. Made in the USA! Made from 10-12 oz. Has ten plated eyelets for the leather lacing to slide through Has a leather insert so that your bar does not hang up on the laces upon insertion Leather color may vary slightly from pictures Tools not included. Made for left side of belt.

High Rider Sleever Bar Holder Left Side of Belt #ad - Latigo leather Leather. Premium leather Ironworker Tool Holder.

#ad



Klein Tools 5416TFR Bolt Bag, Flame Resistant Canvas Bag for Bolt Storage with Double Bottom and Tunnel Loop, 9-Inch

#ad
Klein - Geneva Supply 5416TFR #ad - The hard leather bottom is flame retardant meeting the performance requirements of NFPA-701. And imported components. Features convenient tunnel loop for sliding over your belt. For added protection in the field, Klein's flame-retardant canvas bolt bag is made of flame-resistant No. Tunnel loop for sliding over belt.

Klein Tools 5416TFR Bolt Bag, Flame Resistant Canvas Bag for Bolt Storage with Double Bottom and Tunnel Loop, 9-Inch #ad - 4 canvas. Flame retardant, hard-leather bottom. Meets the performance requirement of NFPA -701. Assembled in usa of U. S.

#ad



The Torro Spud Wrench Holder

#ad
McClure Clan Leathers #ad - Meets the performance requirement of NFPA -701. Assembled in usa of U. S. Made from 10-12 oz. Tunnel loop for sliding over belt. Rings are secured with. 125" kydex. And imported components. Two layers of leather glued together for extra toughness. Leather color may vary from pictures. Will fit up to 3″ belts. Made in the USA!

The Torro Spud Wrench Holder #ad - . Has two heavy duty copper rivets that make the belt loop. Tools not included. Flame retardant, hard-leather bottom. Stitched with heavy duty 207 thread. Will hold three spud wrenches from 3/4″ to 7/8″ and adjustable spuds. Latigo leather. Premium Leather Ironworker tool holder.

#ad



OTC 7168 30" Jimmy Bar

#ad
OTC 7168 #ad - Assembled in usa of U. S. The otc 7168 jimmy bar is forged from chrome alloy steel, and then heat treated to resist bending and breaking. 7/8” diameter and 30” long. Heat-treated to resist bending. 7/8 inch diameter. And imported components. Premium Leather Ironworker tool holder. Made in the USA! Meets the performance requirement of NFPA -701.

30 inches in length. Flame retardant, hard-leather bottom. Forged from chrome alloy steel. Tunnel loop for sliding over belt.

#ad



Klein Tools 5416T Bolt Bag, Canvas Tool Pouch for Bolt/Bull Pin Storage with Tunnel Loop Belt Connection

#ad
Klein - Geneva Supply 5416T #ad - And imported components. Tunnel loop for sliding over belt. And since we're an american company that's family-owned and family-run, you know you can count on us to be here tomorrow. Since 1857. 4 canvas with double bottom for added durability. Tunnel loop belt connection. Forged from chrome alloy steel. Premium Leather Ironworker tool holder.

Klein Tools 5416T Bolt Bag, Canvas Tool Pouch for Bolt/Bull Pin Storage with Tunnel Loop Belt Connection #ad - Flame retardant, hard-leather bottom. Klein tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day. 30 inches in length. Our family of engineers, superior workmanship, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, and keeping manufacturing as close to home as we can.

4 canvas with double bottom. It is also stitched and riveted for added strength. Stitched and riveted for added strength. Tunnel belt connection accepts belts up to 3-Inches wide. Having durable storage solutions on the jobsite is a must. Klein isn't just the name of our company, it's also our family name.

#ad



Klein Tools 3255 Broad-Head Bull Pin Made of Forged, Heat-Treaded Steel With Black Finish, 1-1/4-Inch x 13.75-Inch - -P

#ad
Klein - Geneva Supply -P #ad - Assembled in usa of U. S. Below the head, squared-off shoulders have been forged to provide a surface for applying wrench to loosen wedged bull pins. And since we're an american company that's family-owned and family-run, you know you can count on us to be here tomorrow. Made in the USA! No. Angled head and smooth blending of radii increase strength and reduce the danger of chipping.

4 canvas with double bottom for added durability. Black finish for rust resistance. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can.

Klein Tools 3255 Broad-Head Bull Pin Made of Forged, Heat-Treaded Steel With Black Finish, 1-1/4-Inch x 13.75-Inch - -P #ad - Since 1857. And imported components. Bull pin has black finish and provides a larger striking surface. Heat-treated for strength. Made of heat-treated steel for strength. The klein tools broad-head Bull Pin is machined from quality alloy steel and resists corrosion and mushrooming. Its angled head and smooth blending of radii increase strength and reduce the danger of chipping.

Flame retardant, hard-leather bottom.

#ad



Beater Holder

#ad
McClure Clan Leathers 244 #ad - Flame retardant, hard-leather bottom. Heat-treated to resist bending. Perfect for ironworkers. Tunnel loop belt connection. 4 canvas with double bottom for added durability. Below the head, squared-off shoulders have been forged to provide a surface for applying wrench to loosen wedged bull pins. Forged, heat-treated bull pin increases efficiency by providing a larger striking surface.

Made in the USA! Heavy duty and sturdy enough to hold any beater on your belt. Meets the performance requirement of NFPA -701. Angled head and smooth blending of radii increase strength and reduce the danger of chipping. Made to be worn on 3" belts. Heavy Duty latigo leather. Mcclure clan Leathers Beater Holder.

Beater Holder #ad - Bolt bag with bull-pin loop on each side. No. Head design also reduces chance of pin slipping from the hand when aligning holes. Stitched and riveted for added strength. Premium Leather Ironworker tool holder. 30 inches in length.

#ad



McClure Clan Leathers Bull Pin Holder

#ad
McClure Clan Leathers 49 #ad - Heat-treated to resist bending. Assembled in usa of U. S. And imported components. Meets the performance requirement of NFPA -701. Forged from chrome alloy steel. Premium Leather Ironworker tool holder. Below the head, squared-off shoulders have been forged to provide a surface for applying wrench to loosen wedged bull pins.

Stitched and riveted for added strength. Forged, heat-treated bull pin increases efficiency by providing a larger striking surface. Long, even taper reduces binding and hang-up. Tunnel loop for sliding over belt. 7/8 inch diameter. Premium Ironworker Tool Holder. Head design also reduces chance of pin slipping from the hand when aligning holes.

McClure Clan Leathers Bull Pin Holder #ad - Made to be worn on 3" belts. Heavy Duty latigo leather. 30 inches in length. Made from 10-12 oz latigo leather has ten plated eyelets 10 oz latigo leather lacing for adjustment Has a leather insert to prevent your pin from hanging up on the laces upon insertion Will hold a large or small bull pins securely Bull Pin not included Flame retardant, hard-leather bottom.

4 canvas with double bottom for added durability.

#ad



Spud Wrench 7/8-Inch Bolt for Heavy Nut Klein Tools 3213

#ad
Klein 3213 #ad - Heat-treated to resist bending. Extra-large hub Area works on larger diameter holes than other wrenches. Below the head, squared-off shoulders have been forged to provide a surface for applying wrench to loosen wedged bull pins. Meets the performance requirement of NFPA -701. Angled head and smooth blending of radii increase strength and reduce the danger of chipping.

Spud Wrench 7/8-Inch Bolt for Heavy Nut Klein Tools 3213 #ad - Tunnel loop belt connection. Tunnel loop for sliding over belt. For u. S. Head design also reduces chance of pin slipping from the hand when aligning holes. No. Long, even taper reduces binding and hang-up. Made in the USA! Stitched and riveted for added strength. Heavy nut, 7/8-inch Flame retardant, hard-leather bottom.

Extra-heavy-duty head area gives maximum strength and durability. Klein tools 3213 erection wrench for U. S. Forged, heat-treated bull pin increases efficiency by providing a larger striking surface. 4 canvas with double bottom for added durability.

#ad



Double Barrel Bull Pin/Wrench Holder

#ad
McClure Clan Leathers #ad - Will fit up to 3" belt. For u. S. Below the head, squared-off shoulders have been forged to provide a surface for applying wrench to loosen wedged bull pins. Stitched and riveted for added strength. Heavy Duty latigo leather. Made in the USA! Premium Ironworker Tool Holder. And imported components. Head design also reduces chance of pin slipping from the hand when aligning holes.

Forged from select alloy steel to withstand high-leverage and heavy loads. Will hold adjustable spud wrench. Angled head and smooth blending of radii increase strength and reduce the danger of chipping. Heat-treated to resist bending. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding.

Double Barrel Bull Pin/Wrench Holder #ad - Made to be worn on 3" belts. Forged from chrome alloy steel. Flame retardant, hard-leather bottom. 7/8 inch diameter. Spud wrench not included. 4 canvas with double bottom for added durability.

#ad



30-Inch Hex Bar Klein Tools 3242

#ad
Klein 3242 #ad - Heavy Duty latigo leather. Bolt bag with bull-pin loop on each side. Premium Ironworker tool holder. Diameter: 3/4-inch. Made in the USA! Stitched and riveted for added strength. Head design also reduces chance of pin slipping from the hand when aligning holes. 30 inches in length. No. Long, even taper reduces binding and hang-up.

Meets the performance requirement of NFPA -701. Forged from select alloy steel to withstand high-leverage and heavy loads. Forged, heat-treated bull pin increases efficiency by providing a larger striking surface. 7/8 inch diameter. Made to be worn on 3" belts. Length: 30 inches. Provides extra leverage when positioning steel members and aligning bolt holes.

30-Inch Hex Bar Klein Tools 3242 #ad - Extra-heavy-duty head area gives maximum strength and durability. For u. S. Forged fit-up bar is pointed on one end. Chisel-end is at a 15-degree angle to give greater leverage.

#ad