Clean Sweep Bandsaw Brush

#ad
Carter Products Co. Inc. #ad - Easy to install. The clean sweep helps keep your Bandsaw's tires free from debris which shorten their life and effect blade tracking. Simple but effective upgrade to any bandsaw. Mounts against lower wheel. As debris; saw dust, or any other debris accumulates on the tire, metal on metalworking saws, continued use without cleaning compresses the tire more in other places then if it were in contact with the rubber or urethane alone.

Clean Sweep Bandsaw Brush #ad - Currently only offered for 14" saws Extend bandsaw tire life. Over time the tire will loose its rebound in those places if not cleaned properly and thus decrease tire life.

#ad



Sulpher Grove Tool Urethane Band Saw Tires 1 Inch Wide by 14 Inch Diameter

#ad
Sulphur Grove Tool and Accessories #ad - Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. With band saws it is equally important to choose the right parts and accessories to make your machine run smoothly and without issue. They are designed to be installed on any 14″ band saw that requires a 1″ wide and 3/32″ thick tire.

Heavy duty set of 2 urethane tires. 095 thick urethane tires. This is a two tire set of quality Urethane Band Saw Tires 14″ diameter x 1″ wide x. 095″. Made in the usa and can be trimmed to fit if needed. All of this improves blade tracking and extends the life of your blade. Urethane band saw tires will not dry rot like rubber or plastic tires.

Another advantage of urethane tires over rubber is that no adhesive is needed for proper installation. This makes these tires even easier to install and even easier to remove if necessary. Not only that, the tires are bright orange, which makes them super easy to inspect and they come with a lifetime warranty on the welds.

Sulpher Grove Tool Urethane Band Saw Tires 1 Inch Wide by 14 Inch Diameter #ad - Whether you're setting up a new saw or replacing the tires on an old saw, the urethane tire installation process is quicker and easier for increased productivity and efficiency. From improved performance and safety to reduced downtime, urethane band saw tires provide many advantages over factory tires and rubber or plastic replacement tires.

The actual wheel diameter can be 13-1/2″ to 14-1/2″ in diameter.

#ad



Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades

#ad
Blackstone Industries, LLC AC70010 #ad - Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades #ad - For power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades. Prolongs blade life and produces smoother and quicker cuts. Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch. Lubricant stick is 8" long x 1" in diameter. Prolongs blade life and produces smoother and quicker cuts.

Heavy duty set of 2 urethane tires. 095 thick urethane tires. Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch. For power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades.

#ad



Olson Saw CB50050BL 14" Band Saw Accessory Cool Blocks

#ad
Blackstone Industries, LLC CB50050BL #ad - The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage. Cool blocks blade guides are made from a high tech, non-metallic composite material, "graphite impregnated phenolic laminate". Heavy duty set of 2 urethane tires. 095 thick urethane tires.

For power and hand held cutting tools including band, circular, scroll, hack and jewelers saw blades. For most 14" band saws including Sears Craftsman 14", Jet, Grizzly, ridged. The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage.

Olson Saw CB50050BL 14" Band Saw Accessory Cool Blocks #ad - Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch. For most 14" band saws including Sears Craftsman 14", Grizzly, Jet, Ridgid. Cool blocks blade guides are made from a high tech, non-metallic composite material, "graphite impregnated phenolic laminate" Which contains three synthetic dry lubricants that lubricate the blade but do not make it oily.

Prolongs blade life and produces smoother and quicker cuts.

#ad



Big Horn 14330 Band Saw Tension Crank

#ad
Big Horn 14330 #ad - Heavy duty set of 2 urethane tires. 095 thick urethane tires. Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch. Converts most 14-inch band saw tension screws to a faster, easily adjusted crank handle. Hardware and instructions included. For power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades.

Big Horn 14330 Band Saw Tension Crank #ad - For most 14" band saws including Sears Craftsman 14", Grizzly, Jet, ridged. The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage. Cool blocks blade guides are made from a high tech, non-metallic composite material, "graphite impregnated phenolic laminate".

Prolongs blade life and produces smoother and quicker cuts.

#ad



Olson Saw CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks

#ad
Blackstone Industries, LLC CB50000BL #ad - Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch. Heavy duty set of 2 urethane tires. 095 thick urethane tires. For delta 14" Band Saws. Prolongs blade life and produces smoother and quicker cuts. The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage.

Cool blocks blade guides are made from a high tech, non-metallic composite material, "graphite impregnated phenolic laminate". Contains: 3 guide blocks 1/2" x 1/2" x 3/4" and 1 guide block 1/2" x 3/8" x 1". Cool blocks blade guides are made from a high tech, non-metallic composite material, "Graphite Impregnated Phenolic Laminate" which contains three synthetic dry lubricants that lubricate the blade but do not make it oily.

Olson Saw CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks #ad - Hardware and instructions included. Contains: 3 guide blocks 1/2" x 1/2" x 3/4" and 1 guide block 1/2" x 3/8" x 1". Converts most 14-inch band saw tension screws to a faster, easily adjusted crank handle. For power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades. For most 14" band saws including Sears Craftsman 14", Jet, Grizzly, ridged.

The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage.

#ad



Cobra Coil Bandsaw Tension Spring

#ad
CARTER PRODUCTS COMPANY INC #ad - Heavy duty set of 2 urethane tires. 095 thick urethane tires. The carter cobra coil will restore the tension available for resawing on bandsaws and may even improve the performance of new machines. Converts most 14-inch band saw tension screws to a faster, easily adjusted crank handle. Contains: 3 guide blocks 1/2" x 1/2" x 3/4" and 1 guide block 1/2" x 3/8" x 1".

Hardware and instructions included. Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch. Cool blocks blade guides are made from a high tech, non-metallic composite material, "Graphite Impregnated Phenolic Laminate". Fits delta, general, Rigid, jet, Reliant and most imported 14" bandsaws.

Cobra Coil Bandsaw Tension Spring #ad - Will produce over 10, 000 PSI of blade tension. For power and hand held cutting tools including band, circular, scroll, hack and jewelers saw blades. For most 14" band saws including Sears Craftsman 14", Grizzly, Jet, ridged. The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage.

For delta 14" Band Saws. The carter cobra coil band saw tension spring replacement provides greater durability, superior strength and is a direct replacement for the spring in most 14" saws.

#ad



Kreg KMS7200 Bandsaw Fence

#ad
Kreg KMS7200 #ad - Prolongs blade life and produces smoother and quicker cuts. It adjusts both for blade drift and for perpendicularity to the blade essential when cutting thin veneers. About kreg tool company in 1986 craig sommerfeld was in the process of building his house and needed to find a way to attach his doweled face frames to his kitchen cabinet carcase members.

Fits most 14-inch band saws for versatility. In addition, the fence can be removed and reassembled in a low-profile position to allow the blade guard to be moved closer to the work piece. Fits delta, general, jet, Rigid, Reliant and most imported 14" bandsaws. Precision lens cursor for pinpoint accuracy and dimensions-mounting rail is 26 inch660mm long, fence is 18 inch 457mm long.

This fence is adjustable in two dimensions, and sets parallel to the blade with ease. Most band saw blades don't run perfectly perpendicular to the front of your table. Easy to remove when you don't need the fence, remove it in seconds - no tools required! Just loosen the locking knob and lift the fence from the mounting rail, below your table's surface.

Kreg KMS7200 Bandsaw Fence #ad - Not wanting to nail them on and then fill with putty, he designed and built "Craig's Jig" which was a single-hole pocket hole jig crafted from steel and aluminum that allowed him to attach the face frames from the inside of the cabinet where the joint could be hidden from view. From the manual kreg jig to the fully-automatic Pro Series machines, Kreg offers a simple solution that has changed the way thousands of woodworkers join wood.

The face and top side of the fence contain t-slots for adding stops, resaw guides and more.

#ad



Carter Products QR1000 Quick Release Band Saw Blade Tension Toggle

#ad
Carter QR1000 #ad - Converts most 14-inch band saw tension screws to a faster, easily adjusted crank handle. Installs in minutes and includes all hardware. Fits delta, jet, general, Rigid, Reliant and most imported 14" bandsaws. Precision lens cursor for pinpoint accuracy and dimensions-mounting rail is 26 inch660mm long, fence is 18 inch 457mm long.

Available for Jet and Delta 14" band saws. Cool blocks blade guides are made from a high tech, non-metallic composite material, "graphite impregnated phenolic laminate". Easy to attach and remove for less downtime and more productivity. Heavy duty set of 2 urethane tires. 095 thick urethane tires. Prolongs blade life and produces smoother and quicker cuts.

Carter Products QR1000 Quick Release Band Saw Blade Tension Toggle #ad - Cool blocks blade guides are made from a high tech, non-metallic composite material, "Graphite Impregnated Phenolic Laminate". Instantly relieve tension to prevent damage to band saw tire and prolong band saw blade life. Built to last with solid steel construction. For power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades.

For most 14" band saws including Sears Craftsman 14", Grizzly, Jet, ridged. The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage.

#ad



POWERTEC 70124 Universal Dust Port, 2 1/2"

#ad
Southern Technology LLC 70124 #ad - Converts most 14-inch band saw tension screws to a faster, easily adjusted crank handle. For delta 14" Band Saws. Prolongs blade life and produces smoother and quicker cuts. To connect to 2-1/2" standard hose. Cool blocks blade guides are made from a high tech, non-metallic composite material, "graphite impregnated phenolic laminate".

Easy to attach and remove for less downtime and more productivity. Opening 2-1/2-inch nominal end measures 2-15/32-Inch tapered O. D. For power and hand held cutting tools including band, circular, scroll, hack and jewelers saw blades. For most 14" band saws including Sears Craftsman 14", Jet, Grizzly, ridged.

POWERTEC 70124 Universal Dust Port, 2 1/2" #ad - The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage. Designed to attach easily and securely to machines for connecting to dust collection systems. And 19/64-inch I. D. Flange end measures 3-5/8-Inch by 4-Inch. Fits most 14-inch band saws for versatility.

Pre-tension blade slightly during blade changes for easier adjustment.

#ad



CARTER MAGFENCE II Universal Magnetic Fence

#ad
Carter Products Co. Inc. #ad - Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch. Instantly relieve tension to prevent damage to band saw tire and prolong band saw blade life. Easily removed to use with multiple equipment. Prolongs blade life and produces smoother and quicker cuts. Pre-tension blade slightly during blade changes for easier adjustment.

CARTER MAGFENCE II Universal Magnetic Fence #ad - Built to last with solid steel construction. Will produce over 10, 000 PSI of blade tension. Cool blocks blade guides are made from a high tech, non-metallic composite material, "Graphite Impregnated Phenolic Laminate". Installs in minutes and includes all hardware. Two powerful, switchable magnets for quick, precise adjustments.

Hardware and instructions included. Designed to attach easily and securely to machines for connecting to dust collection systems. And 19/64-inch I. D. Flange end measures 3-5/8-Inch by 4-Inch. Fits most 14-inch band saws for versatility. Heavy duty set of 2 urethane tires.

#ad