Adafruit FONA 808 – Mini Cellular GSM + GPS Breakout ADA2542

#ad
Adafruit 4333025617 #ad - Quad-band 850/900/1800/1900mhz - connect onto any global gsm network with any 2g sim in the usa, t-mobile is suggestedfully-integrated gps  mt3337 chipset  with -165 dBm tracking sensitivity that can be controlled and query over the same serial portMake and receive voice calls using a headset or an external 32Ω speaker + electret microphoneSend and receive SMS messagesSend and receive GPRS data TCP/IP, HTTP, etc.

Pwm/buzzer vibrational motor controlat command interface with "auto baud" detectionhere's the GPS specifications:22 tracking / 66 acquisition channelsGPS L1 C/A codeSensitivity: Tracking: -165 dBm, Cold starts : -147 dBmTime-To-First-Fix: Cold starts: 32s typ. Hot starts: 1s typ. Warm starts: 5s typ. Accuracy: approx 2.

5 meterssounds delicious, right? so we plated this fine module onto a little breakout with all the extras you need to make your next project shine:Onboard LiPoly battery charging circuitry so you can take your projec Adafruit part Number: 2542. In stock & Ready to Ship. This module can do just about everything.

Adafruit FONA 808 - Mini Cellular GSM + GPS Breakout ADA2542 #ad - If you want a shield version with gps, check out the Adafruit FONA 808 Shield - Mini Cellular GSM + GPS for Arduino click here. Cellular + gps tracking, text, an all-in-one cellular phone module with that lets you add location-tracking, all in one? Oh yes! Introducing Adafruit FONA 808 MiniGSM + GPS, voice, SMS and data to your project in an adorable little package.

If you want a shield version without GPS, check out the FONA 800 Shield  click here.

#ad



Adafruit Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL ADA1991

#ad
Adafruit 1991 #ad - The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're making something like, say, a DIY phone. In stock & Ready to Ship. Stock type: Wireless >> Antennas. That's one slim cellular antenna! at just 75mm long from tip to tip and and with a thickness of just 2mm,  compact and sensitive, this 3dBi GSM antenna is slim, with a 3dBi gain.

Adafruit Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL ADA1991 #ad - It has a tiny ufl connector on the end - which is perfect for the  fona - but will also work well for any other RF project on the 850/900/1800/1900/2100 bands, such as any other Cellular or GSM/GPRS device. We also offer a version of this antenna with a longer 300mm cable. Adafruit part Number: 1991.

#ad



9mm X 9mm -2dbi Gain - Passive Gps Antenna Ufl

#ad
Adafruit 2460 #ad - 9mm X 9mm -2dbi Gain - Passive Gps Antenna Ufl #ad - Comes with a standard uFL connector on the end. This is the 9mm version Adafruit part Number: 1991. Wow that's a tiny gps antenna! This passive antenna is only 9mm x 9mm x 6. 5mm in size, with a 50mm long uFL cable. Perfect for our fona 808! not good for our Ultimate GPS breakouts/shields/hat as those are designed for active antennas.

In stock & Ready to Ship. Stock type: Wireless >> Antennas. Great for when you want to keep things small.

#ad



Battery Packs Lithium Ion Polymer Battery 3.7V 1200mAh 1 piece

#ad
Adafruit 258 #ad - Stock type: Wireless >> Antennas. Adafruit part Number: 1991. This battery has a capacity of 1200mAh for a total of about 4. 5 wh. The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. The output ranges from 4. 2v when completely charged to 3.

7v. It will also protect against output shorts. Please make sure this battery will fit your application by measuring against the dimensions below. The batteries come pre-attached with a genuine 2-pin jst-ph connector as shown and include the necessary protection circuitry. Because they have a genuine jst connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.

Battery Packs Lithium Ion Polymer Battery 3.7V 1200mAh 1 piece #ad - Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2c or even less - 500mA max in this case which is how much you can get from a USB port. In stock & Ready to Ship. Lithium ion polymer also known as 'lipo' or 'lipoly' batteries are thin, light and powerful.

However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 500mA or less. The included protection circuitry keeps the battery voltage from going too high over-charging or low over-use which means that the battery will cut-out when completely dead at 3.

#ad



15mm x 15mm 1 dBi gain ADA2461 - Adafruit Passive GPS Antenna uFL

#ad
Adafruit 4333154650 #ad - In stock & Ready to Ship. This is the 15mm version - we also have a smaller 9mm uFL GPS Antenna. Because they have a genuine jst connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly. Adafruit part Number: 2461. Adafruit part Number: 1991. Wow that's a tiny gps antenna! This passive antenna is only 15mm x 15mm x 6.

15mm x 15mm 1 dBi gain ADA2461 - Adafruit Passive GPS Antenna uFL #ad - 8mm in size, with a 50mm long uFL cable. Stock type: Wireless >> Antennas. In stock & Ready to Ship. Please make sure this battery will fit your application by measuring against the dimensions below. The batteries come pre-attached with a genuine 2-pin jst-ph connector as shown and include the necessary protection circuitry.

This battery is for general use. Perfect for our fona 808 ! not good for our Ultimate GPS breakouts/shields/hat as those are designed for active antennas. Stock type: Wireless >> Antennas. Great for when you want to keep things small. Comes with a standard uFL connector on the end.

#ad



Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates ADA746

#ad
Adafruit - #ad - 5v friendly design and only 20mA current draw. In stock & Ready to Ship. Stock type: Wireless >> Antennas. 165 dbm sensitivity, 10 Hz updates, 66 channels. Note: this part was updated from adafruit #99 discontinued to Adafruit #746 Adafruit believes this is the Ultimate GPS module, so they named it that. It's got everything you want and more Adafruit part Number: 1991.

In stock & Ready to Ship. This battery is for general use. Please make sure this battery will fit your application by measuring against the dimensions below. The batteries come pre-attached with a genuine 2-pin jst-ph connector as shown and include the necessary protection circuitry. Because they have a genuine jst connector, the cable wont snag or get stuck in a matching JST jack, not a knock-off, they click in and out smoothly.

Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates ADA746 #ad - Adafruit part Number: 2461. Stock type: Wireless >> Antennas.

#ad



Rechargeable 5V Lipo USB Boost @ 1A - 1000C - Adafruit PowerBoost 1000 Charger

#ad
Adafruit 2465 #ad - Solder in the usb connector and you can plug in any iPad, iPhone or iPod for 1000mA charge rate. Full breakout for battery in, control pins and power out90%+ operating efficiency in most cases see datasheet for ef Adafruit part Number: 1991. Stock type: Wireless >> Antennas. The 5. 2v is safe for all 5v-powered electronics like Arduino, Raspberry Pi, or Beagle Bone while preventing icky brown-outs during high current draw because of USB cable resistance.

The powerboost 1000c has at the heart a  TPS61090 boost converter from TI. Stock type: power >> USB Battery Packs. This battery is for general use. In stock & Ready to Ship. If you dont need the 1a battery charger, smart load-sharing, check out the Powerboost 500C Like our popular  5V 1A USB wall adapter, or 1A iOS resistors, we tweaked the output to be 5.

Rechargeable 5V Lipo USB Boost @ 1A - 1000C - Adafruit PowerBoost 1000 Charger #ad - 2v instead of a straight-up 5. 0v so that there's a little bit of 'headroom' for long cables, the addition of a diode on the output if you wish, high draw, etc. In stock & Ready to Ship. This will completely turn off the output2A internal switch ~2. 5a peak limiting means you can get 1000mA+ from a 3. 7v lipoly/LiIon battery.

#ad



U.FL Mini PCI to RP-SMA Pigtail Antenna WiFi Cable Pack of 2

#ad
OneLinkMore OL0559-X #ad - Adafruit part Number: 2465. Stock type: power >> USB Battery Packs. 165 dbm sensitivity, 10 Hz updates, 66 channels. In stock & Ready to Ship. This battery is for general use. Package content : 2 x RP SMA to IPX Cable. Help you connect rp sma male Hole in center, thread inside and IPX male connectors. 1. 13mm cable black color ipx sma terminal block, mini pci, PDA, drone, Antenna, WLAN, GPS, transmitter, wide application: Mobile phones, Bluetooth, electronic measuring instrument.

Rp sma female pin in center to IPX ufl Female Coaxial Connector. In stock & Ready to Ship. Coaxial extension adapter rP SMA Jack Female Pin Connector to IPX/U. Fl adapter antenna cable jumper pigtail cordimpedance:50ΩTemperature:-20℃~+70℃VSWR:≤1. 5frequency range:dc~6000mHz Adafruit part Number: 1991.

U.FL Mini PCI to RP-SMA Pigtail Antenna WiFi Cable Pack of 2 #ad - In stock & Ready to Ship. Because they have a genuine jst connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly. Adafruit part Number: 2461. Please make sure this battery will fit your application by measuring against the dimensions below. The batteries come pre-attached with a genuine 2-pin jst-ph connector as shown and include the necessary protection circuitry.

#ad



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
Elegoo EL-CP-004 #ad - 17cm long for extension u. Fl to rp sma antenna Adapter Cable. We have the manufacture factory, making productions and selling by ourselves. Because they have a genuine jst connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly. Adafruit part Number: 2461.

5v friendly design and only 20mA current draw. Packing in a color box. We have always cared about the customer experience and improve the product function details. In stock & Ready to Ship. This battery is for general use. 165 dbm sensitivity, 10 Hz updates, 66 channels. So we can control the quality of our productions by ourselves for you.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - Package content : 2 x RP SMA to IPX Cable. Help you connect rp sma male Hole in center, thread inside and IPX male connectors. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Please make sure this battery will fit your application by measuring against the dimensions below.

The batteries come pre-attached with a genuine 2-pin jst-ph connector as shown and include the necessary protection circuitry.

#ad



ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable

#ad
ELEGOO EL-CB-005 #ad - It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, ATN, GND on one top, RX, so users have more breadboard space. In stock & Ready to Ship.

Each cable length: about 20 cm /8-inch. Adafruit part Number: 2465. It's got a pin layout that works well with the Mini or the Basic Stamp TX, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27.

ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable #ad - Please make sure this battery will fit your application by measuring against the dimensions below. The batteries come pre-attached with a genuine 2-pin jst-ph connector as shown and include the necessary protection circuitry. It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package.

Use the driver from above link. It is a smallest, complete, and breadboard friendly board. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. 1. 13mm cable black color ipx sma terminal block, gps, Antenna, PDA, drone, mini pci, Bluetooth, transmitter, wide application: Mobile phones, WLAN, electronic measuring instrument.

#ad



Raspberry Pi Zero W Wireless 2017 model

#ad
Raspberry Pi LTD Zero W #ad - You could download the driver of Elegoo Nano V3. 0 at: http://bit. Ly/2jklJMO. 17cm long for extension u. Fl to rp sma antenna Adapter Cable. Because they have a genuine jst connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly. Adafruit part Number: 2461.

Please make sure this battery will fit your application by measuring against the dimensions below. The batteries come pre-attached with a genuine 2-pin jst-ph connector as shown and include the necessary protection circuitry. Package content : 2 x RP SMA to IPX Cable. 5v friendly design and only 20mA current draw.

Raspberry Pi Zero W Wireless 2017 model #ad - The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Bluetooth: bluetooth Classic 4. 1 and bluetooth LE. Soc: broadcom bcm2835--cpu: arm11 running at 1GHz--RAM: 512MB. Stock type: Wireless >> Antennas. Each cable length: about 20 cm /8-inch.

Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Dimensions: 65mm × 30mm × 5mm.

#ad